Yet another modification to the Fiero's engine cradle! The scribed line, and three drilled holes is where the front engine
mount (angle iron) will be attached with 7/16" grade 5 bolts.

Honestly, this is what makes this entire swap possible. These are components from the Archie V8 Fiero swap kit. On
the left is the engine adapter plate and a bag of misc parts. On the right (in the blue box) is the harmonic balancer.

Here are more components from the kit. The aluminum piece is the alternator bracket. The two steel pieces make up
the front mount mount. In the flat, white box underneath is the flywheel that attaches to the small block Chevy V8 and
allows you to still bolt up the stock Fiero clutch!

<<< Previous Page  |  Next Page >>>